Join in
Member ID: Password:
Directory and Search for Global Trade

North America

Beliebte Suchen:Hardware-WerkzdegBüroPapier
more
Local Site: Global China Japan Korea Russia Vietnam France Spain India German Italy Argentina

248 Condensate Accumulator

Varec Biogas

[American]
Contact:

address:
6101 Ball Road, Suite 201 Cypress, CA 90630
Tel:
1-866-424-6427
Fax:

Http:
www.varec-biogas.com
E-mail:
info@varec-biogas.com

See larger image

Product Type:
Mechanical Parts & Fabrication...
Post Date :
2014-12-25 15:55:46
Expiry Date:
6 months
Quantity:
Specs:
contact us
Payment Method:

  • Product Detail
  • Company Profile
  • Products List
  • Contact
Biogas is usually hot and saturated when it leaves the digester. It continues to cool as it goes through the piping system causing water condensate to drop out. The removal of condensate from the biogas piping system is necessary to protect piping and equipment from possible damage caused by corrosion or water hammer.
 
The 248 Series Condensate Accumulator can store a significant amount of condensate. It is usually installed at the lowest point of the piping system.
 
The simple design of the 248 Series permits easy and reliable maintenance and operation. The unit uses an internal drip leg and operates with a water seal under normal operating conditions. The height of the water seal should not expose the tip of the drip leg that is inside the vessel.
 
The drip leg is sized to prevent surges from expelling the liquid seal. As condensate from the gas is diverted to the accumulator, the drip leg will automatically drain the amount of condensate that is above the level of the water seal. The drip leg exit connection must be properly piped using a tee to prevent syphoning. One end of the tee is to vent, and the other is to drain.
 
Two 1/2” NPT connections are provided for sight glass installation. It allows visual inspection of the water seal and condensate level during start-up and normal operation. A large 2-inch NPT blowout and drain connection is provided to remove entrained solids or sediment.
 
248_l 248
Pdf-download-icon
Features:
 
Large Condensate Reservoir
Simple Operator
Optional Alarm Switches
Varec (VApor RECovery Specialty Company) began business in the 1930's at its manufacturing plant in Compton, California. Varec was there in the infancy stage of the biogas market in the early 1950's. From the onset, Varec's focus was to deliver Biogas Handling products that suited customers' specific requirements, even if it meant creating the product off the drawing board. Varec initially sold direct to end-users and in the 1970's instituted a Sales Representative Network that catered to Municipal Wastewater Treatment Plants. A select number of Sales Representatives in the United States helped Varec acquire approximately 90% installed base from the 2,500 Wastewater Treatment Plants that utilize Anaerobic Digesters for Biosolids Treatment built between the mid-60's to late 70's. Today, Varec Biogas is 100% dedicated in providing total solutions to the biogas market. In February, 2003, Westech Industrial Inc. acquired the biogas portion of the Varec business from Tyco Valves and Controls, LP Inc. The Varec-Westech relationship is over 40 years old. Westech became the Canadian sales representative for Varec in 1966, and was also Varec's supplier of its most reliable waste gas burner, Model 244W now twenty years strong. Varec Biogas remains focused on the needs of our customers allowing our relationships to grow stronger. Our focus is on delivering what our customer wants. We make it our business to ensure it happens. Our greatest asset is, and will always be, our customer's loyalty. We will constantly strive at becoming experts of our customer's business and creating the solutions that will meet and exceed their rising expectations and future needs.
Biogas is usually hot and saturated when it leaves the digester. It continues to cool as it goes through the piping system causing water condensate to drop out. The removal of condensate from the biogas piping system is necessary to protect piping and equipment from possible damage caused by corrosion or water hammer.
 
The 248 Series Condensate Accumulator can store a significant amount of condensate. It is usually installed at the lowest point of the piping system.
 
The simple design of the 248 Series permits easy and reliable maintenance and operation. The unit uses an internal drip leg and operates with a water seal under normal operating conditions. The height of the water seal should not expose the tip of the drip leg that is inside the vessel.
 
The drip leg is sized to prevent surges from expelling the liquid seal. As condensate from the gas is diverted to the accumulator, the drip leg will automatically drain the amount of condensate that is above the level of the water seal. The drip leg exit connection must be properly piped using a tee to prevent syphoning. One end of the tee is to vent, and the other is to drain.
 
Two 1/2” NPT connections are provided for sight glass installation. It allows visual inspection of the water seal and condensate level during start-up and normal operation. A large 2-inch NPT blowout and drain connection is provided to remove entrained solids or sediment.
 
248_l 248
Pdf-download-icon
Features:
 
Large Condensate Reservoir
Simple Operator
Optional Alarm Switches