Join in
Member ID: Password:
Directory and Search for Global Trade

North America

Beliebte Suchen:Hardware-WerkzdegBüroPapier
more
Local Site: Global China Japan Korea Russia Vietnam France Spain India German Italy Argentina

Insta-Cure+™ Super Glue, CA

Bob Smith Industries, Inc

[American]
Contact:

address:
8060 Morro Road Atascadero, CA 93422
Tel:
1-805-466-1717
Fax:
1-805- 466-3683
Http:
www.bsi-inc.com
E-mail:
contact@bsi-inc.com

See larger image

Product Type:
Rubber & Plastics/Plastic Prod...
Post Date :
2016-01-21 15:01:17
Expiry Date:
6 months
Quantity:
Specs:
1
Payment Method:

  • Product Detail
  • Company Profile
  • Products List
  • Contact
Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.
 
 
Works Best On:
 
Balsa Wood
Soft Wood
Works Good On:
 
Hard Wood
Glass & Metal
Fiberglass
Ceramics
Hard Plastics
Rubber
Laminating
Water-Resistant
Reinforcing
Unscrew top from nozzle. For finer applications, use the extender tip. Apply Insta-Cure+™ CA to one side of the parts being joined, then hold them tightly together for 5-15 seconds. For larger bonding areas, apply serpentine beads of the CA with enough spacing to allow for the spreading of the adhesive. Insta-Set™ accelerator can be sprayed to cure the CA that oozes from joints. Full strength is reached in three hours. Wipe the nozzle clean before replacing screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40 to 220° F. Soak extender tip in acetone for cleaning.
Bob Smith Industries has been producing adhesives for the Hobby Industry since 1983.
 
Bob Smith - BSI Adhesives - Founder of BSI - Glues Made in the USA
BSI’s owner Bob Smith started competing in Radio Control Formula 1 Pylon Racing in 1968. In 1970, at the age of 17, Bob became the youngest pilot ever to win the U.S. Nationals. He went on to win the National Point Championship three times. In 1971 Bob started his own company, P.B. Products (later named Bob Smith R/C Aircraft) producing radio control airplane kits. With a U.S. Patent for a wing molding process mixed with Bob’s skills in fiberglass craftsmanship, he produced the first ever all fiberglass airplane, the T2-A, and was ahead of his time designing the “almost ready to fly” Seabreeze. After 12 years of manufacturing fiberglass kits, Bob came up with the idea of marketing custom labeled adhesives in the Hobby Industry. Starting with just 20 dealers and 3 types of epoxies, BSI now manufactures a full line of epoxy and cyanoacrylate (CA) adhesives for hobby and industrial use, with over 1800 dealers worldwide. In addition to the highest quality standard high performance surface insensitive CAs, BSI has a full line of flexible and rubber toughened CA along with both thin and gap-filling formulations of odorless foam safe CA and foam safe accelerator. BSI's adhesives match or surpass the performance of the adhesive products from the billion dollar corporations in addition to being available locally at a fraction of the cost.
Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.
 
 
Works Best On:
 
Balsa Wood
Soft Wood
Works Good On:
 
Hard Wood
Glass & Metal
Fiberglass
Ceramics
Hard Plastics
Rubber
Laminating
Water-Resistant
Reinforcing
Unscrew top from nozzle. For finer applications, use the extender tip. Apply Insta-Cure+™ CA to one side of the parts being joined, then hold them tightly together for 5-15 seconds. For larger bonding areas, apply serpentine beads of the CA with enough spacing to allow for the spreading of the adhesive. Insta-Set™ accelerator can be sprayed to cure the CA that oozes from joints. Full strength is reached in three hours. Wipe the nozzle clean before replacing screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40 to 220° F. Soak extender tip in acetone for cleaning.