Join in
Member ID: Password:
Directory and Search for Global Trade

North America

Beliebte Suchen:Hardware-WerkzdegBüroPapier
more
Local Site: Global China Japan Korea Russia Vietnam France Spain India German Italy Argentina

D Series Water Heaters

Sioux Corporation

[American]
Contact:

address:
One Sioux Plaza Beresford SD 57004 United States
Tel:
1-888-763.8833
Fax:
1-605-763.3334
Http:
www.sioux.com
E-mail:
contact@sioux.com

See larger image

Product Type:
Machinery/Air Cleaning Equipme...
Post Date :
2015-09-08 16:36:39
Expiry Date:
6 months
Quantity:
Specs:
contact us
Payment Method:

  • Product Detail
  • Company Profile
  • Products List
  • Contact
The D Series is ta  water heater Sioux manufactures. The D Series incorporates the same basic unit as the M Series but without the centrifugal pump. The D Series is typically used for smaller volumes of water. However, a minimum water pressure of 60 PSI (4.14 BAR) is required to operate the system properly. If inlet pressure drops below 60 PSI (4.14 BAR), approximately 12 gal/min water flow, the burner will shut off to prevent damage to the heater. For this reason the M Series is more commonly used for ready mix concrete applications.
D Series Water Heater
 
Standard construction features include:
1-3 Million BTU/hr
Indicator light to alert operator that the low water flow limit switch has shut down the burner due to inadequate water flow.
The high temperature switch and the manual reset high temperature limit switch shut off burner in case of excessive water discharge temperature. 
ASME-rated pressure relief valve opens to discharge water in case of excessive buildup. 
Pressure gauges and bi-metal thermometers on both inlet and outlet allow monitoring of differences between incoming and outgoing water temperature and pressure. Y-strainer on water inlet ensures foreign particles do not enter heater water supply. 
Available in Oil, LP, Natural Gas or Combination Oil and Gas burner. 
Alternate electricals available.
Custom designs available. 
Optional stainless steel wetted parts for a variety of industrial applications including heating sodium cyanide for heap leaching, etc.
Third party approved to UL508A and CAN/CSA-C22.2 No. 14-10, ensuring that the entire control panel assembly meets the UL and CSA standards. Canadian Registration Number (CRN).

Since 1939, Sioux Corporation has been designing and manufacturing industrial-quality cleaning equipment, water heating and cooling systems, solution heaters and steam generators. Sioux equipment is extremely reliable and built to withstand the rigors of the industrial workplace. Highly knowledgeable sales and engineering departments will ensure that you get the machine that best fits your application. If the equipment in our standard line doesn’t meet your needs, we can custom design a machine for you. Take a look around our website or contact us today to learn more about our capabilities. 

The D Series is ta  water heater Sioux manufactures. The D Series incorporates the same basic unit as the M Series but without the centrifugal pump. The D Series is typically used for smaller volumes of water. However, a minimum water pressure of 60 PSI (4.14 BAR) is required to operate the system properly. If inlet pressure drops below 60 PSI (4.14 BAR), approximately 12 gal/min water flow, the burner will shut off to prevent damage to the heater. For this reason the M Series is more commonly used for ready mix concrete applications.
D Series Water Heater
 
Standard construction features include:
1-3 Million BTU/hr
Indicator light to alert operator that the low water flow limit switch has shut down the burner due to inadequate water flow.
The high temperature switch and the manual reset high temperature limit switch shut off burner in case of excessive water discharge temperature. 
ASME-rated pressure relief valve opens to discharge water in case of excessive buildup. 
Pressure gauges and bi-metal thermometers on both inlet and outlet allow monitoring of differences between incoming and outgoing water temperature and pressure. Y-strainer on water inlet ensures foreign particles do not enter heater water supply. 
Available in Oil, LP, Natural Gas or Combination Oil and Gas burner. 
Alternate electricals available.
Custom designs available. 
Optional stainless steel wetted parts for a variety of industrial applications including heating sodium cyanide for heap leaching, etc.
Third party approved to UL508A and CAN/CSA-C22.2 No. 14-10, ensuring that the entire control panel assembly meets the UL and CSA standards. Canadian Registration Number (CRN).