The Extinguishing Assembly is a pre-assembled device that mounts to the duct downstream of the detector location and upstream of the inlet to a dust collector. It is made up of a number of componen
A Booster Pump may be required in installations where the plant water supply is insufficient to meet the minimum requirements of the FLAMEX system. Three separate models are available. Pump units c
A Flow Monitor can be provided "pre-installed" on each FLAMEX Extinguishing Assembly. The Flow Monitor is wired to the FLAMEX Control Panel and indicates a water flowing condition (minimu
FLAMEX offers several models of Industrial Smoke Detectors including Photoelectric, Ionization, Air sampling and Duct Smoke Detectors. The specific model to be selected is determined by the applica
This Flame detector is commonly referred to as the "Triple IR Detector" because it offers a 3 channel IR analysis in the 2.0-6.0 micron range. It is designed to detect open flames that ca
This detector is a sophisticated thermal sensor that will alarm when a pre-set fixed temperature is exceeded and when an abnormal rate of heat rise is detected. It has the advantage of being able t
The standard sensor described above can be fitted with a fiberoptic assembly (light conductor) that allows the detector to be used in applications where constant operating temperatures exceed 176 D
This highly sensitive detector responds to IR in the .78-1.2 micron range. Its high degree of sensitivity requires its use in dark, closed environments such as pneumatic ductwork. The detector has
Detecting a spark in a pneumatic material transport duct at speeds that often exceeds 5,000 feet per minute requires a very sensitive and very fast sensing device. The FUX 3001-E Spark Detector pro
Control panels are sized based upon the requirements of the application. A number of models with various features are available. Panels can range from the most basic single zone console to sophisti